Flashforge Dreamer Dual Extruder Multicolor 3D Printer Print WIFI Touchscreen W/2 Spool Fully Enclosed Chamber Kit 3D Printer
Customer ReviewsWrite a review
Delivery was carried out quickly, home one day before the declared date by the seller. Packing as on video. In the box there is no suitcase for tools as on video, instead of it a soft cosmetic bag (cost reduction). The equipment corresponds to the declared. There are two coils of PLA-filament of 0,5 kg. On the memory card, 3 test files, two for PLA (for right and left extruder) and one cube of Gerbert for ABS, judging by the temperature settings of the machine. I. E. double extrusion distortion do not check. The common coil will not fit the seat, you need to print the racks for the right and left side. Russian does not support, although there are a bunch of others, even Lithuanian, Polish, Dutch/Dutch. The habit is to use English localization. In general, everything suits, I recommend the seller. We are waiting from the manufacturer Russian localization of all his products.
Delivery 6 days. courier brought. It was bent ends, it had to be restored, but uncritical. Prints immediately, very acceptable. The noise is not critical, in the other room it is not easy at all. Proga-slicer native, on the flash drive, after installation updated in Russian without problems. The table when adjusting-the center is slightly pressed at three points adjusted, but there are no problems when printing. The menu is in English, but everything is simple and understandable. Native coils are non-standard-if you print a lot, you need to take out the case and print or town the holder for the coils, the problem is small. And so you can order a coil of 0,5 kg, raise the holders for 3-4 cm and fit (although for the price such coils stand for 1 kg.). To the table stick the PLA Products perfectly, other plastic has not yet tried to print.
Ultra Fast shipping to France coming European warehouse. No taxes. The first tests are top the prints literally stick to the surface of the plate. The adjustment of the tray despite its manual is very easy to do. It is my second printer the other being a Prusa MKS3 which will allow me to alternate because the tray is small is the only defect. When A bigger tray. In short very good value for money This site is really Top a small mistake in sending, just a contact with the seller and then an answer and the solution in 24 h. Do not hesitate to order in this very professional store
as described, fast delivery
I will say immediately, the purchase pleasantly surprised. This is my second 3D printer, the first one was Zonestar (Prusa i3) -not bad for 2017, but dancing with a tambourine had to then almost a month a month To make it more or less decent to print two extruders. This time I expected something like this, but dreamer really prints "out of the box"! An hour for a non-assembly (with tightening and lubricating), and the printer already produces the first product (see. Photo). Did not calibrate, the firmware did not update, only put a gap-let's go! :) Intermediate results for the day: mechanics tolkovaya, assembled neatly. The extruders run out minimum and are compensated in settings. On the forums write about the closed firmware-the umelets have already written several options for custom firmware, you can roll up with the possibility of returning to the factory. Uneven Table (replace the substrate). Of the minuses: completely stupid, useless vayfai (only as an access point), until he won. In general, I'm delighted, as the first 3D printer is the best option!